openCarPC controller v1.1

Hi!

In a previous post I have explained how I have interfaced Raspberry PI GPIOs with XBMC, using buttons and rotary encoders.
I have reworked the application which controls this and now there are more features available.
You can use this post to set up the hardware connections between Raspberry PI GPIO connector and as many buttons and rotary encoders as you like(or you have room for on the RPI GPIO pins).

At this moment my setup has 2 rotary encoders, each of them having also a push button.
You can use this tutorial to set up your car steering wheel controls to control this system.

XBMC builtin functions are now supported.
For a list of available XBMC builtin functions have a look at this link.

Groups of commands are supported.
Commands should be separated by the '+' character. For example:
xbmcbuiltin_PlayerControl(previous)+KB_minus
will execute both commandsa t once when the corresponding button is pressed, or when the rotary encoder is turned in the correct direction.

Multiple groups of commands are supported.
Groups of commands should be separated by the '>' character.
When the action is triggered(button pressed or rotary encoder rotated in the correct direction) the commands are executed consecutively.
For example:
xbmcbuiltin_ActivateWindow(Music)>xbmcbuiltin_ActivateWindow(Videos)
When you press the button for the first time XBMC will switch to Music window. When you press it the second time XBMC will switch to Videos window and when pressed again, XBMC will switch back to Music window.

Note:
The groups of commands were designed to support multiple programs control. At this moment I am working on external radio support so you can set the volume of radio and volume in XBMC at the same time. This will be available in a future post.
This doesn't mean that you can use multiple XBMC commands at once.

To download the latest version, please checkout the Downloads link from the right of the blog, in the openCarPC tools folder. The current version is 1.1.

Have fun!

OpenCarPC

Hi!

I have worked on some new features for my CarPC. Here are the changes:
First, some videos:

The latest image can be downloaded from the Downloads link on the right of this blog(username:pi, password:a).
Note!
If you do not have any rotary encoder connected or any buttons with a resistor you need to disable the carpc-controller application. You can do this by editing the file /home/pi/StartCarPC and commenting the line which contains carpc-controller.

Hardware updates:
- added ViewHd HDMI to HDMI+audio board
- added SI4703 FM Radio module
- created an expansion board with fm radio module and three connectors(one for GPS receiver and two for rotary encoders)
- added a very cheap board to mix two output channels(RPI and radio) into a single output(which goes to the amplifier, in my case AUX input of the car player)

Software updates:
- added loading movie(created by Doru Ignat)
- added a python server responsible for controlling the radio module via i2c
- added new XBMC plugin for controlling the FM Radio(including storing up to 5 radio stations in a file)
- improved carpc-controller to support sending multiple commands for a single button press or encoder turn(e.g. turning right one rotary encoder can increase the volume in XBMC and the volume of radio at the same time)
- improved the speed in Navit clicking
- improved the Navit OSD for both day and night setup(Navit switches automatically teh setup based on the time of the system).
- added time synchronization mechanism based on GPS readings(RPI does not have a real time clock)

The expansion board.

RE1 and RE2 are rotary encoders.

The FM Radio driver and Python server.
The FM Radio module is connected using i2c communication interface(GPIO0-SDA and GPIO1-SCL of the PI).
The radio driver is contained in the si4703 python class. The Radio server is implemented in the file radio_server.py(which is automatically started at boot time). This server simply opens a socket and waits for data. After any data is received, a couple of if-else statements different radio functions are called base on the incoming data.
The available commands are:

seek_right - search for a new station in the right of the current frequency
seek_left - search for a new station in the left of the current frequency
tune_xx.x - set the current frequency to xx.x MHz
volume_xx - set the volume of the radio module to xx. xx should be between 0 and 15
toggle_mute - toggle mute
get_frequency - get the current frequency

The server reply with the current frequency for each command.

Simple test.
To understand how this radio server-client works you can make the folowing experiment:
1. Plug the gpio expansion board(or wire the radio module to the PI as in the above schematic)
2. [Server] Connect using one ssh window(I use Putty) to the PI and enter the folowing commands:
cd radio
sudo python radio_server.py
The radio server should initialize the  radio module and start the server.
3. [Client] go to the radio folder and use radio_client.py to send commands o the radio server, like in the folowing picture:

The file radio_client.py simply opens an UDP socket, puts an '_' character between arguments and send the obtained string to the server socket.

The radioFM XBMC plugin.
In order to simplify user interaction I have created a new XBMC plugin(radioFM). Its purpose is to allow interacting with the Radio Server(and with the Radio Module) using the touch screen. In order to be able to use this plugin you need to have the radio_server.py started and the FM module plugged in.

Features:

• The current frequency is displayed at the top.
• The left and right arrow buttons are for seeking to the next channel(left or right).
• The bottom 5 buttons are preset channels(these are kept in a file so they are available after reboot).
• The Set/Tune Channels button is used for changing the mode in which the bottom buttons are operating. By default they are in the 'Tune' mode, so if you presss them the radio will tune to that frequency. If you press the Set/Tune Channels button once you will enter the Set mode, which will allow you to store the current channel in which preset button you like(or in all of them... if you want) by pressing it once. You will see that the frequency will be changed.

Connecting two audio sources(RPI and Radio) to one amplifier.
In order to correctly hook up two audio sources together(putting them in parallel) for a single output you have to use one schematic from this document. I have used the last schematic. Don't forget to use at least 1% tolerance for the resistors.

The new GPIO controller.
The GPIO controller is now using the official XBMC client code from xbmcclient.h.
Now, you can call a lot more XBMC functions for any button pressed or encoder movement.

TODO List:
- update to the latest Raspberry PI firmware(today it is possible but then Navit won't be visible)
- remove the calibration file for XBMC(/usr/share/eGalax/touchscreen_axes_calib) and use the values from the Debian calibration file(/usr/share/X11/xorg.conf.d/01-input.conf)
- create an XBMC addon to allow calibrating the touch screen for both XBMC and X11 windows and also for calibrating the external encoders and button
- create a configuration page(XBMC addon) for the carpc-controller settings
- create a better audio mixer unit
- create a new page for launching different X11 applications